B-series Feed Hammer Mill Introduction
B-series feed hammer mill is a wide chamber feed ingredients grinding machine. It can crush all kinds of raw materials for making feed pellets, such as maize, sorghum, wheat, beans, etc. It can be used to common grinding or fine grinding of feed materials, especially for fine grinding. Featured with stable performance, compact structure, low energy consumption, easy to operation, convenient to maintain, long service life, etc. Thie series feed hammer mill is widely used in medium and large-sized food processing industry and feed pellet plant.
B-series Feed Hammer Mill Features
● This series wide chamber feed hammer mill has stable performance, compact structure, easy operation, convenient maintenance, low energy consumption and long service life.
● Widely used in medium and large scale feed mills and food processing plants.
● The machine has scientific and reasonable arrangement of hammers and hammer-screen clearance, so the fineness of final products are more uniform.
● The hammer mill can be used to common grinding and fine grinding, they are mostly used for fine grinding.
● The fineness of grinding can be up to 50 mesh.
● It adopts second-hit technology in crushing chamber to achieve fineness. It has good base rigidity and low vibration.
● It adopts NSK bearings, SKF bearing seat of Germany, the temperature indicator of bearing, with small temperature rise during operation
● Multiple options of screen sizes, fast-open door mechanism and flexible screen press structure, easy to change the screen.
Application of Wide Chamber Feed Hammer Mill
♦ Grinding various raw materials for making feed pellets, such as maize, sorghum, wheat, beans, soyabean cake, peanut cake, cottonseed meal, rapeseed cake, sunflower seed cake, sesame, etc.
♦ It can also be used to grind raw materials of pharmaceutical industry.
Maintenance and Conservation of Wide Chamber Feed Hammer Mill
1.Before using this machine, you should check all parts, especially check the fastener whether strong or not.
2.When you are washing the shredders, you should prevent water from rushing into the motor and bearing, so as not to affect the service life of machine. And pay attention to keep the grinder cleaning.
3.To extent the service life of the bearing, you should add some lubricants regularly.
4.If some abnormal conditions occurs, you must stop the feed hammer mill immediately. It can be used only after maintenance.
5.You should check the whole machine once six months.
6.You should make a record of each maintenance and conservation.
Differences Between B-series Feed Hammer Mill and Electric Feed Hammer Mill
1. B-series feed hammer mill is widely used in medium and large sized feed pellets plants, while electric hammer mill mainly used for farm-use or small size of feed factory.
2. B-series feed hammer mill can used for common grinding and fine grinding, however, electric feed hammer mill can only used for common crushing.
3. Electric hammer mill can crushing all kinds of foodstuff and straw, such as peanuts shell, branches, while wide-type fine hammer mill only can grinding foodstuff.
4. B-series feed hammer mill is more suitable for making fish feed pellets than electric hammer mill, because the fineness of grinding can be up to 50 mesh.
B Series Feed Hammer Mill Technical Data
|
Model
|
FY-ZW-60B
|
FY-ZW-80B
|
FY-ZW-100B
|
FY-ZW-120B
|
|||
|
Rotor diameter
|
660mm
|
660mm
|
660mm
|
660mm
|
|||
|
Main shaft speed(rpm)
|
2980
|
2980
|
2980
|
2980
|
|||
|
Linear speed
of the hammer(m/s)
|
78
|
78
|
78
|
78
|
|||
|
Crushing chamber width(mm)
|
600
|
800
|
1000
|
1200
|
|||
|
Hammer number
|
112
|
128
|
144
|
156
|
|||
|
Power（KW）
|
55
|
75
|
90
|
110
|
80
|
100
|
|
|
Normal air volume(M3/min)
|
Common grinding
|
42
|
46
|
55
|
61
|
80
|
100
|
|
Fine grinding
|
55
|
60
|
72
|
78
|
100
|
130
|
|
♦ Output of B-series feed hammer mill(based on the right installation and correct operation)
|
Model
|
FY-ZW-60B
|
FY-ZW-80B
|
FY-ZW-100B
|
FY-ZW-120B
|
||
|
Power
|
55
|
75
|
90
|
110
|
132
|
160
|
|
Output of common grinding(t/h)
|
9
|
12
|
14
|
16
|
18
|
20
|
|
Output of fine grinding(t/h)
|
2
|
3.5
|
4.5
|
6
|
8
|
10
|
(NOTE: All above technical data is calculated under the following conditions: the moisture content of maize should be not more than 13%，the bulk density should be not less than 0.72t/m3, the diameter of the pore of sieve is 3mm, and the opening rate not less than 33%.)
♦ Sizes of B-series feed hammer mill
|
FY-ZW-60B
|
FY-ZW-80B
|
|
|
A
|
2000mm
|
2500mm
|
|
B
|
1100mm
|
1100mm
|
|
C
|
1300mm
|
1300mm
|
Leave A Comment