Diesel Flat Die Feed Pellet Machine

Introduction of Diesel Flat Die Feed Pellet Machine

Diesel flat die feed pellet machine, also known as diesel flat die feed pellet mill, which is used to produce feed pellet for livestock and poultry like pigs, chicken, cattle, rabbits, dogs, cats, etc. It can lower feed costs for medium-scale and small-scale farms dramatically. It creates features in terms of quality and perfect pelletizing results.
Diesel flat die feed pellet machine and electric flat die feed pellet machine are known as small feed pelletizer for personal use or farm-made feed making purpose. But diesel flat die feed pellet machine driven by diesel engine has no power limit, you can use it anywhere.

Features of Diesel Flat Die Feed Pellet Machine

●Advanced and durable
Using advanced welding techniques to ensure that our diesel flat die feed pellet mill lasts a long lifetime without incurring extra repair expenses. Special steel for die and roller that can reduce wear and extend life expectancy.
●Private customized
You can select different models according to your own needs, such as animal species, the scale of farming and raw materials.
●Convenient to move
Driven by diesel engine, this feed pellet mill can produce feed pellets in any place, without energy limit.
●Wide application
All kinds of raw materials can be pelletized by our diesel flat die feed pellet making machine, such as grass, corn, wheat, soybean, alfalfa, straw, rice hull and other raw material.
● We can supply diesel flat die feed pellet machine with Electric Starter and without electric starter based on your need.

Feed Pellet Mill without Electric Starter

Feed Pellet Mill with Electric Starter

Notes on Operating Diesel Flat Die Feed Pelletizer

1. Please carefully read the operation instruction and follow the technicians professional guidance before start running.
2. Check the easy-wear parts and other components regularly to ensure normal operation.
3. Avoid overloading production to guarantee a long service life of the pellet mill.
4. Cleaning the material before feeding them into the pellet mill may be needed to remove rocks, in case they damage the die or roller.
5. If the pellet mill is not used for a long time, the machine should be cleaned thoroughly, especially when the pellet machine is used to pelletize feed materials with high oil content, in order to keep pellet mill from rust and die holes form blockage.
6. Replace flat die with proper diameters of die holes to make different sizes of pellets.
7. If you want to make biomass pellets by our diesel flat die pellet machine, you would better use relatively soft biomass materials.
8. The roller bearing must be cleaned with petrol or diesel every five days. The gearbox is maintained once every 6 months. Grease the bearings every work eight hours.Kingpin bearing must be washed once 7days.

Troubleshooting of Diesel Flat Die Feed Pellet Machine

1. Low feed pellets production

♦The first time a diesel flat die feed pelletizer is used with feed pellet produce. The production will increase after using several times.
♦Material moisture content is too high or too low. Adjust the material moisture content.
♦Roll and flat die gap is too large.Adjust the gap distance between die and roller.
♦The roll or flat die badly worn.Replace roller or die.

2. The feed pellet surface roughness

♦ Drying the raw material, make sure the moisture content below 20%.

3. Abnormal sound

♦ Foreign materials get into the equipment. Remove foreign materials.

4. Flat die does not rotate

♦Bearing damage
♦Replace bearings

5. A low voltage and small motor

♦ Appropriately enlarge the distance between roller and flat die.
♦Replace the fuse
♦Shutdown and remove foreign

6. Suddenly stop

♦Overload (even blown fuse)
♦A foreign body into the cavity

Diesel Flat Die Feed Pellet Mill Technical Parameter